FF DuraFix Ultimate

FF DuraFix Ultimate—Type 4 & Type C2TE S2 Tile and Stone Adhesive

FF DuraFix Ultimate is a premium single component thin set highly deformable (flexible) cement and polymer based tiles fixing adhesive, ready to use after addition of water. It is classified as Type 4 as per IS 15477:2019 and Type C2TE S2 as per EN 12004-1:2017

It is recommended for use of both wall and floor tiling in interiors and exteriors for the toughest of applications, including those of

  1. Engineered Stones/Composite marbles
  2. Substrates subject to heating, vibration or not fully cured substrates
  3. Tiles susceptible to chemical reactions
  4. Substrates subject to some vibration

The FF DuraFix Ultimate is also suitable for above applications and applications like those on slabs and podiums subject to light vehicular movement.


Can be used for all type of tiles on

Plastered Surfaces | Concrete | Light-weight Blocks | Plaster Board | Fibre Cement | Heated underfloor | Wood | Ply | Properly laid waterproofing membranes

FF DuraFix Ultimate is also ideal for most outdoor tiling needs as it exhibits excellent adhesion properties even after water immersion, heat ageing and under deformation.

Key Features


High Adhesion to Substrate

Less peeling off | High bonding

Slight Flexibility in Material

Less cracks | Large panel sizes

Thin Layer Application

Environment friendly

High Strength

High durability | Low maintenance cost

Lower Dimensional Shrinkage

Fewer cracks in concrete

High Consistency of Material

Peace of mind

Low Requirement of Curing

Less supervision required at site

High Workability

Fast completion of project

High Bonding

Better adhesion

Extensively Tested at Factory

Quality assurance for you