FF DuraFix Flex

FF DuraFix Flex—Type 3 & Type C2TE S1 Tile and Stone Adhesive

FF DuraFix Flex is a premium quality thin set polymeric cement-based tiles fixing adhesive with Slight flex properties, making it suitable for use on slightly deformable surfaces or for deformable materials. It is classified as Type 3 as per IS 15477:2019 and Type C2TE S1 as per EN 12004-1:2017

It is recommended for use of both wall and floor tiling in tile sizes up to 1200 mm*1200 mm.

The FF DuraFix Flex by Freeform is made using special additives, selected fillers and high-quality polymer resins. The deformable type of tile adhesive is highly resistant to heat ageing and water, making it ideal for use in facade cladding and water bodies.


Can be used for all type of tiles on

Plastered Surfaces | Concrete | Light-weight Blocks | Plaster Board

Suitable for interior and exterior surfaces. It is specially recommended for tile-on-tile job.

Key Features


High Adhesion to Substrate

Less peeling off | High bonding

Good Flexibility in Material

Less cracks | Large panel sizes

Thin Layer Application

Environment friendly

High Strength

High durability | Low maintenance cost

Lower Dimensional Shrinkage

Fewer cracks in concrete

High Consistency of Material

Peace of mind

Low Requirement of Curing

Less supervision required at site

High Workability

Fast completion of project

High Bonding

Better adhesion

Extensively Tested at Factory

Quality assurance for you


White Colour

Also available in white colour on request